Annually

CC1030221

Wheel Bearings

Remove wheels. Clean bearings.

Except baler from S.N. 80000 and Premium baler:

Lubricate with John Deere GREASE-GARD.

Baler from S.N. 80000 and Premium baler:

Lubricate with grease type NLGI number 3.

Repack and adjust bearings.

For balers equipped with wheel nuts, tighten the nuts to the following specification:

Specification

Wheel nut (baler without brake) -Torque 210 N·m (155 lb-ft)
Wheel nut (baler with brake) -Torque 270 N·m (200 lb-ft)

For balers equipped with wheel bolts, tighten the bolts to the following specification:

Specification

Wheel bolt -Torque 120 N·m (88 lb-ft)

OUCC006,000131B -19-27SEP07-1/3

Lubricate with John Deere GREASE-GARD.


A-Lower tension arm pivot
B-Net actuator pins
C-Net box pivots (both sides)
D-Brake pad pivots

CC1027497
CC1027498
CC1027499

OUCC006,000131B -19-27SEP07-2/3

CC1030236
 

A-Nut

B-Lock nut

C-Hitch fixing screw

  

Retighten tongue frame fixing nuts (A), lock nuts (B) and hitch fixing screw (C) to specified torque:

Specification

Tongue frame fixing nut -Torque 700 N·m (516 lb-ft)
Tongue frame lock nut -Torque 300 N·m (221 lb-ft)
Hitch fixing screw -Torque 620 N·m (450 lb-ft)

OUCC006,000131B -19-27SEP07-3/3