Adjusting Bale Discharging Ramp

Except baler from S.N. 80000 and Premium baler:

1. Park baler on level ground.

2. Open the gate and secure it with safety lock device. Engage tractor parking lock, shut off tractor engine and remove key.

3. Adjust nuts (B) so that bale discharging ramp (A) touches the ground when there is a load on the ramp and the baler is attached to the tractor.

IMPORTANT: Bale discharging ramp (A) should touch the ground when loaded. Failure to do so can result in discharging ramp damage.

If bale discharging ramp can not touch the ground, lower the machine by adjusting wheel spindles. See "Adjusting Wheel Spindles" in this section.


A-Bale discharging ramp
B-Nut

CC1021593

572 and 582 Discharging Ramp

CC1021595

572 and 582 Adjusting Nut

CC1027470

592 Discharging Ramp

CC1027469

592 Adjusting Nut

OUCC006,000131E -19-28SEP07-1/2

Baler from S.N. 80000 and Premium baler:

1. Park baler on level ground.

2. Open the gate and secure it with safety lock device. Engage tractor parking lock, shut off tractor engine and remove key.

3. Adjust nuts (B) to obtain specified distance (C):

Specification

C -Distance 55 ± 5 mm (2.16 ± 0.2 in.)

IMPORTANT: Bale discharging ramp (A) should touch the ground when there is a load on the ramp and the baler is attached to the tractor. Failure to do so can result in discharging ramp damage.

If bale discharging ramp can not touch the ground, lower the machine by adjusting spacers 1 for axle. See your John Deere dealer.


A-Bale discharging ramp
B-Nuts
C-Distance

CC1028764
CC1030241

1only available with rotary feeder pickup

OUCC006,000131E -19-28SEP07-2/2