|
Rated Operating Loads are applicable only when using combi frame pallet fork or heavy-duty bucket, tractor and implements shown in this section, up to recommended maximum speed on a hard, moderatey smooth and level surface. They represent lift capacity to maximum height determined in accordance with ASAE S301.3 when the tractor is equipped with recommended ballast and tread is adjusted to the appropriate setting.
Rated Operating Load should only be used as a guide to lifting capacity of loader in any particular situation. The load that is safe to lift will vary depending upon
|
tractor model, tractor specifications and set-up, ground conditions and operating speed. Refer to appropriate sections of Operator's Manual for further information on tractor set-up, operating stability and safety.
If front loader is installed on a tractor model other than shown in this section, then Rated Operating Load may be different, in which case the operator should seek advice from the dealer or supplier.
Refer to John Deere Sales Manual for available attachments.
|