Operating 3rd and 4th Functions with 2-Function Independent Control Valve and Diverter

causym CAUTION: As soon as the switches for 3rd or 4th function are released the control lever goes back to its primary functions: dump to the right-hand side and roll back to the left-hand side.

NOTE: If loader does not respond as expected to control lever movement:

  • Check for correct hose connections and electrical connections. See "Identifying Hose Connections" in "Service" Section.

  • Check tractor hydraulic oil level. See your tractor operator's manual.

NOTE: 4th function need the front-end implement to be fitted with the required diverter valves.

The multi-function lever is protected by a fuse.

On loader equipped with 3rd and 4th functions through diverter valve, select 3rd or 4th function by continuously pressing on button (A) or (B) then push the lever to the right-hand side to open the implement or pull it to the left-hand side to close the implement.

CC1018057


A-3rd function
B-4th function
C-MEMOSYSTEM switch

OUCC006,00010AB -19-01JUN06-1/1