Load Twine Box

CC7718-UN-23SEP98

CC7767-UN-23SEP98

A - Guide

B - Tension Plate

Place a ball of good quality twine in each compartment of the twine box. Be sure the twine is pulled from end of ball marked ”Top”.

Join balls of twine by tying outside end of the first ball to inside end of the next one. When joining twine, use a modified square knot for sisal twine and a sheet bend knot for plastic twine.

Trim loose end of twine as close to knot as possible.

Thread twine from the center of each ball through its respective guide (A) in the box lid.

Always have a new ball of twine in the left compartment.

Thread both ends of twine through tension plate (B) on the side of the twine box.