Side Straw Resistors (Attachment on 349, 359 and 459)

CC2349-UN-23SEP98

Side straw resistors can be mounted on each side of the bale case. They provide increased bale density, which is especially recommended when baling light, dry material.

IMPORTANT: Before installing the resistors, ensure that the paint inside the bale case has worn off sufficiently; this is the main reason why the straw resistors are not installed in the bale case at the factory.

Up to two sets of straw resistors may be installed, depending on the desired bale density. If one set of resistors is used, screw in the front holes.

As the baling conditions become normal, remove the resistors set by set, starting at the rear of the bale case.