Flywheel shear bolt sheared
Sharpen knives.
Obstruction in bale case
Remove all obstructions.
Too much clearance between knives
Adjust plungerhead.
Crank stop improperly adjusted
Adjust stop.
Worn clutch ring
Replace.
Bales too heavy
Decrease bale tension.
Needles in bale case
Place needles in home position.
Sheared knotter and needle drive bolt
Loosen knotter drive brake.
Needles out of time
Retime needles.
Needles hitting obstructions
Obstruction in knotter
Needles out of adjustment
Adjust needles.
OUCC002,00022F5-19-20060703