Store Baler at End of Season

Shelter baler in a dry place.

Clean inside and outside of baler thoroughly. Trash and dirt will draw moisture and cause rust.

Clean out knotter or twister mechanism and coat with grease.

Thoroughly lubricate baler (see Lubrication and Maintenance Section).

Paint all parts from which paint has been worn, except inside of bale case. Brush bale case with grease.

Clean all chains by washing them with diesel fuel. Dry well and coat with a heavy oil.

Loosen slip clutch springs. When stored under pressure, slip clutch linings may draw moisture. Linings may bond to metal parts causing slip clutch to be ineffective and resulting in machine damage.

Block up baler under axle, taking load off tires. DO NOT DEFLATE TIRES. Cover tires to protect them from light, grease, oil etc.

List replacement parts that will be needed and order them early. The John Deere dealer can expedite delivery of parts and install them during slack periods, avoiding delays at the next baling season.