-
□ Have all parts been delivered with the bundle and installed
on the baler?
-
□ Is the gear case oil level correct?
-
□ Has shipping plug been replaced with relief valve on
gear case?
-
□ Are all grease fittings lubricated?
-
□ Is the powerline cut to the correct dimensions?
-
□ Is drive slip clutch correctly adjusted?
-
□ Is pickup spring tension properly adjusted?
-
□ Are knotters or twisters correctly adjusted?
-
□ Measuring arm adjustment is correct?
-
□ Is clearance between plunger head and stationary knives
correct?
-
□ Is baler correctly timed?
-
□ Are chains correctly tensioned and lubricated?
-
□ Are all screws and nuts tightened to specified torque?
-
□ Are all moving parts working freely?
-
□ Are all shields secured and in place?
-
□ Make a test run of the machine.
-
□ Have all lines and hoses been checked and are they
free of leaks?
-
□ Has tire inflation been checked?
-
□ Are paint and decals smooth and neat?
-
□ Have all controls and safety rules been explained to
the operator?
-
□ Has Operator's Manual been given to operator?