-
□ All grease fittings and lubrication points lubricated.
-
□ All bolts and nuts have been tightened to the specified
torque.
-
□ Tire inflation checked and adjusted.
-
□ Tractor wheel tread properly adjusted.
-
□ Loader is properly installed on the tractor.
-
□ Hydraulic lines are correctly laid out.
-
□ Test run of the machine has been carried out and is
OK.
-
□ Hydraulic hoses and connections are free from leaks.
-
□ Transmission and hydraulic system oil levels are OK.
-
□ Paint and decals are smooth and neat.
-
□ The operator is familiar with the safety precautions
to be taken with the loader.
-
□ Operator's manual has been given to the customer.
-
□ Bundle containing Lift Cylinder Mechanical Locks installed
on the loader (Australia only).
-
□ Tractor identification plate has been installed on
the loader (Australia only).
-
□ As specified in this OM, the following information
has been recorded on this plate, using a letter punch: tractor model
for which the loader is being purchased, counterweight/ballast for
the loader/tractor combination, rated operating load (ROL) of the
loader (Australia only).