603R NSL Loader Specifications on 6105MC Tractor

CC1036916-UN-03FEB12

Tractor Model 6105MC
Minimum Rear Ballast	3-Point Hitch 1150 kg (2535 lb.)
Front Tires	480/70R24
Rear Tires	520/70R38
Maximum Loader Weight Including Mounting Frame
Mass	950 kg (2095 lb.)
Standard Material Bucket
Width	1850 mm (6 ft. 13/16 in.)
Length	—
Mass	236 kg (520 lb.)
Hydraulic System
Rated Flow	114 L/min. (30 gpm)
Maximum Pressure	20100 kPa (200 bar) (2900 psi)
Cycle Times (in seconds)
Loader Raise Time	3.11
Loader Lower Time	2.34
Bucket Dump Time	2.65
Bucket Roll-Back Time	1.81
Lift Height (Maximum)
To Pivot Pin (A)	3900 mm (154 in.)

Specifications and design subject to change without notice

Clearance
Bucket Level (B)	3630 mm (143 in.)
Bucket Dumped (C)	2880 mm (113 in.)
Digging Depth (H)	120 mm (5 in.)
Reach
At Maximum Lift Height with Bucket Dumped (D)	891 mm (35 in.)
Bucket on Ground with Bucket Leveled (F)	2489 mm (98 in.)
Angles (Maximum)
Dump (E)	56°
Dump at Ground	143°
Roll back (G)	53°
Lift Capacity
To Maximum Height (A) at Pivot Point	2308 kg (5088 lb.)
To Maximum Height (A) at 800 mm (2 ft. 7 in.) (I) Ahead of Pivot Point	1590 kg (3505 lb.)
To 1500 mm (4 ft. 11 in.) (J) at Pivot Point	2593 kg (5717 lb.)
Breakout Force
At Pivot Point	2809 kgf (6193 lbf)
800 mm (2 ft. 7 in.) (I) Ahead of Pivot Point	2025 kgf (4464 lbf)