623R NSL Loader Specifications on 6120R Tractor

CC1036916-UN-03FEB12

Tractor Model 6120R
Minimum Rear Ballast	3-Point Hitch 1500 kg (3307 lb.)
Front Tires	480/70R24
Rear Tires	520/70R38
Maximum Loader Weight Including Mounting Frame
Mass	955 kg (2105 lb.)
Standard Material Bucket
Width	1850 mm (6 ft. 13/16 in.)
Length	—
Mass	236 kg (520 lb.)
Hydraulic System
Rated Flow	114 L/min. (30 gpm)
Maximum Pressure	20100 kPa (200 bar) (2900 psi)
Cycle Times (in seconds)
Loader Raise Time	3.43
Loader Lower Time	2.57
Bucket Dump Time	2.65
Bucket Roll-Back Time	1.81
Lift Height (Maximum)
To Pivot Pin (A)	4124 mm (162 in.)

Specifications and design subject to change without notice

Clearance
Bucket Level (B)	3854 mm (152 in.)
Bucket Dumped (C)	3088 mm (122 in.)
Digging Depth (H)	91 mm (4 in.)
Reach
At Maximum Lift Height with Bucket Dumped (D)	759 mm (30 in.)
Bucket on Ground with Bucket Leveled (F)	2548 mm (100 in.)
Angles (Maximum)
Dump (E)	59°
Dump at Ground	151°
Roll back (G)	53°
Lift Capacity
To Maximum Height (A) at Pivot Point	2622 kg (5780 lb.)
To Maximum Height (A) at 800 mm (2 ft. 7 in.) (I) Ahead of Pivot Point	1757 kg (3873 lb.)
To 1500 mm (4 ft. 11 in.) (J) at Pivot Point	2729 kg (6016 lb.)
Breakout Force
At Pivot Point	2841 kgf (6263 lbf)
800 mm (2 ft. 7 in.) (I) Ahead of Pivot Point	2065 kgf (4552 lbf)