Adjusting Fan Speed

The fan speed can be increased or decreased by pressing the switch as illustrated. It is only possible with the engine running, threshing engaged and the road safety switch in field position.

IMPORTANT: After changing fan speed, alarm speed must also be readjusted (refer to Section "Warning Devices and Monitors").

NOTE: The current fan speed can be displayed on the infotrak monitor.

The fan speed mechanism is protected by course limiter switches. The speed can change between 550 and 1150 rpm.

The change of the fan speed is slower than other speed changes because it is driven electrically and not hydraulically.

I-Increase fan speed
II-Decrease fan speed

AG,CO03622,1657 -19-11OCT02-1/1