Cylinder Drive Reduction Gear Housing

Change oil in cylinder reduction gear after the first 100 hours of operation. Thereafter after every 800 hours of operation or after each harvesting season (whichever occurs first). Check oil level after every 200 hours of operation.

IMPORTANT: When checking oil level and topping off with oil, variable sheaves must be fully apart. The oil flows very slowly. After approx. 15 min. check oil level again and top off if necessary.

A-Breather Plug
B-Oil filler and level plug
C-Oil drain plug

AG,CO03622,2188 -19-05FEB02-1/1