Service During The Break-In Period

DURING THE FIRST 100 HOURS OF OPERATION

• Perform service daily or once every 10 operating hours (see this section and "Fuel, Lubricants, Coolant and Capacities").
• Do not idle the engine unnecessarily.
• Check coolant temperature repeatedly.
• Check engine oil and coolant level frequently. Look for signs of leaks.
• If it becomes necessary to top off with engine oil during the break-in period, select an oil of a viscosity corresponding to the seasonal requirements and the information in this section.
• Check that the hoses and hose clamps in the air intake system are secure.
• Check drive belts and adjust if necessary.

AG,GG05155,210 -19-17MAY02-1/1