Every 10 Horas
-
Engine oil level
-
Air compressor, oil level
-
Hydraulic system level
-
Cooling system level
-
Radiator screen
-
Tires
-
Hydrostatic drive oil level
-
Fuel System
-
Light functions
-
Lubricate the 10 hours lubrication points.
-
Check shift lock solenoid operating function (CWS)
After first 10 hours only:
-
Retighten retaining screws between steering cylinder mounting and rear axle to 24 kgm (240 Nm; 174 lb-ft).
After first 40 hours only:
-
Change oil of air compressor.
After first 50 hours only:
-
Retighten front wheel nuts to 55 kgm (550 Nm; 400 lb-ft).
-
Retighten rear wheel nuts to 18 kgm (180 Nm; 130 lb-ft).
-
Retighten final drive retaining screws to 35 kgm (350 Nm; 252 lb-ft).
-
Retighten retaining screws on 3-speed transmission.
-
Retighten retaining screws on front axle.
-
Lubricate the 50 hours lubrication points.
-
Change gear box oil.
|