After The First 100 Hours

Includes work described under "Every 10 Hours".

• Change engine oil and filter.
• Change final drives oil.
• Change hydraulic filter.
• Change hydraulic oil. (Only if not using John Deere Hy-Gard ® oil).
• Change hydrostatic system filter.
• Change hydrostatic system oil. (Only if not using John Deere Hy-Gard ® oil).
• Check drive belts tension and adjust if necessary.
• Check fuel system
• Check connections on fuel injection lines.
• Check that the hoses and hose clamps in the air intake system are secure.
• Check belts and chains.
• Check play of final drive flanged axle bearings.

HY-GARD is a registered trademark of Deere & Company

AG,GG05155,212 -19-17JUN02-1/1