Area Counter - Setting up (CWS)

Two sets of information must be determined by the operator in order to make the system work. It is important that the following is precisely measured:

1. Circumference of the wheel to which the magnet is mounted.
2. Working width of the platform used.

These two figures are determined as follows:

MB03730,0000210 -19-07OCT02-1/2

Wheel circumference is determined as follows:

1. Mark out in the field and on the tire.
2. Drive until the rear wheel has made 10 revolutions.
3. Mark out in the field again.
4. Now measure the distance between the two marks in metres and centimetres. Divide this distance by 10 the result being the effective wheel circumference.

NOTE: Remember to count revolutions of the rear right side wheel on which the magnet is monted.

H-Wheel circumference

MB03730,0000210 -19-07OCT02-2/2