INFO-TRAK Monitor Functions

A - Position Indicator:

shows relationship between display and key or key combination (I-VII) pressed previously.

When activating INFO-TRAK™ monitor (starter switch in position I or II), the position indicator will be in upper left-hand position.

B - Line indicator:

indicates the active line on the display on which cursor (A) is showing the corresponding function.

C - Display Panel (4 Digits):

shows the figure called up previously.

Possibilities:

Ground and other speeds, operating or working hours.

Additional displays: SERVICE information "SEU" and concave spacing.

Error codes:

In the event of a malfunction or operator error during combine operation or when running an automatic function, a two or three-digit number followed by an E (Error) is displayed. For example: 234 E .

D - Line selector switch:

changes active line on the display panel

E - Clock:

press this key to display the time on the display panel.

F - Ground speed display key (I).

G - Cylinder speed display key (II).

H - Engine speed display key (III).

ZX014263
ZX011411

AG,CO03622,1438 -19-26SEP03-1/2


J - Fan speed display key (IV) and enter key for calibration modes.

AG,CO03622,1438 -19-26SEP03-2/2