Tire Radius Code

For input of tire radius code, use actual tire radius. The radius must be input in inches for combines with machine code 83. The radius must be input in millimeters for combines with machine code 103.

NOTE: Rear tire radius must be inputted into the INFO-TRAK Monitor when measuring the distance traveled. This is because the combine movement sensor is located on the rear axle.

NOTE: For new tires, refer to the tire chart for correct radius values.

Drive Tire Tire Rolling Radius (mm) Tire Rolling Radius (in)
28.1 - 26 (750/65 R26) 756 29.7
18.4 - 30 R1 10L 741 29.1
18.4 - 30 R1 12L 741 29.1
24.5 - 32 849 33.4
620/75R 30 (Radial) 810 31.8
(650/75 R32) 863 33.9
28.1/18 - 26 R1 14L 761 29.9
28L26 R1 12L 767 30.1
23.1/18 - 26 R2 10L 780 30.7
23.1/18 - 30 804 31.6
800/65R 32 (Radial) 861 33.8
30.5L32 R1 857 33.7
STEEL TRACK 315 12.4

 

CQ194730

AG,CO03622,1445 -19-09SEP03-1/2


Steering Tire Tire Rolling Radius (mm) Tire Rolling Radius (in)
540/65 R24 635 24.9
12,4-24 R1 10L 554 21.8
440/65 R24 562 22.1
12.4-24 R1 6L 546 21.5
16.9-24 8L 614 24.2
16.9-24 10L 614 24.2
14.9-24 8L 586 23.1
10.5-18 I1 6L 446 17.5
335-80 R20 942 37.1
16.9-24 R4 8L 611 24.1
14.9-24 R2 8L 608 23.9

 

NOTE: With worn tires, refer to the following instruction to determine tire radius.

AG,CO03622,1445 -19-09SEP03-2/2