Determining Tire Radius

This instruction is for both drive (front) and steering (rear) tires.

Requirements:

·Combine on flat, solid ground.·Cutting platform mounted.
·Correct tire pressures.
·Combine rear wheels (steering wheels) in straight-ahead position.

Place mark on tire and ground. Marks must be in contact with each other.

Drive combine until marked tire has completed one revolution.

Transfer mark on tire to ground.

Measure distance (X) between the marks on the ground. The distance (X) must be measured in inches for combines with machine code 83. The distance (X) must be measured in millimeters for combines with machine code 103.

Divide measured distance (X) by 6.28 for any unit.

The obtained value is the tire radius to input in the INFO-TRAK monitor.

CQ208760

AG,CO03622,1446 -19-09SEP03-1/1