Harvest Performance Monitor

CQ191872


A-Sieve sensor
B-Straw walker sensors


C-Display unit


D-Adjusting/selecting unit


E-Ground speed sensor

AG,CO03622,1452 -19-20AUG04-1/2


General Description

The harvest performance monitor records the amount of grains that hit its sensors at the cleaning shoe (A) and straw walkers (B). Ground speed is measured via sensor (E). Once this factor has been taken into account, the loss rate is displayed on the display unit (C). Display unit (C) indicates the loss level that is acceptable to the user in relation to the area harvested.

The performance monitor enables the operator to utilize the combine's maximum capacity within the selected performance range. After the operator has

adjusted the combine and cutting platform to suit the harvesting conditions, the monitor must also be calibrated (adjusted) to these conditions by means of the adjusting/selecting unit (D).

Incorrect adjustment and inadequate servicing of the combine always results in grain loss and reduced performance. The causes of grain loss are dealt with in detail in the "Preparations and Field Operation" section. Particular attention should be paid to the information provided on "Grain Loss-Explanations and Examples" and "Prevention of Grain Loss- General".

AG,CO03622,1452 -19-20AUG04-2/2