Starting the Engine

causym CAUTION: For safety reasons, sound horn before starting the engine or operating the combine. Start engine from operator's seat only.

Turn starter switch to position III. As soon as engine starts, release key. Never hold the key in the starting position for longer than 20 seconds.

If key switch is released to position I before engine starts, wait until engine stops turning over before trying again.

IMPORTANT: If engine does not start within 20 seconds, wait at least two (2) minutes before trying again. Do not effect more than four (4) attempts to start engine.

NOTE: With temperatures lower than 0°C, after starter switch has been turned to position II, the ECU automatically engages an electric heater, via a relay, in the air intake duct, to increase intake manifold air temperature and improve cold starting. During this operation indicator light (A) turns on. After this light turns off the engine can be started (CWS/WTS).

ZX002403
CQ209452

Indicator lights - Engines with ECU (CWS/WTS)

AG,CO03622,1514 -19-20AUG04-1/1