Stopping the Engine

IMPORTANT: Before finally shutting off the engine, run at slow idle for 1-2 minutes to allow engine to cool.

  • Put the multifunction control handle in neutral.
  • Disengage all drives.
  • Engage parking brake.
  • Lower header to ground.
  • Set throttle lever to idle (1450/1550).
  • Place throttle rocker switch in position I (CWS/WTS).
  • Turn starter switch to position "0".

causym CAUTION: Always remove key before leaving operator's cab.

ZX002402

AG,CO03622,1521 -19-28JUL04-1/1