Header Drive Tumbler Switch (With Operating Lock)

NOTE: With this switch in the on position, the engine start system is blocked.

Requirements:

·Engine idling.

·Road safety switch in field position.

·Separator engaged.

Engaging Header Drive (I):

Push up operating lock (A) and depress top part of switch (symbol).

Disengaging Header Drive (II):

Depress lower part of switch.

NOTE: For emergency stop, use the "QUICK STOP" switch on the multifunction control handle. In this situation the header disengages with the header drive switch in ON position, to reactivate this function it is necessary turn the header drive switch OFF and ON again.

NOTE: Only CWS/WTS combines with operator presence switch: This switch will disengage this function when activated. To reengage it, sit down again in operator's seat and turn the corresponding switch OFF and ON.

ZX002284

AG,CO03622,1546 -19-20AUG04-1/1