Grain Cleaning Process
The effectiveness of the chaffer and grain sieve separating action is increased by an intensive fan blast. This blows the chaff, which is lighter than grain, into the rear.
NOTE:
The blast should be as strong as possible, but grain loss should be kept to a minimum.
As a result of "overthreshing", the cleaning unit may become overloaded, resulting in poor separation of the grain from the chaff. A considerable amount of grain is lost, dropping to the ground with the straw at the rear of the combine.
Check:
·Is concave spacing too narrow?
·Is the cylinder speed too high?
·Is the intensity of the blast adapted to sieve load?
|