Prevention of Grain Loss- General

There is no patent remedy when it comes to preventing grain losses. The threshing process is so complex that a certain relationship between "adjustment" and "result" must be found.

IMPORTANT: Grain loss rises with the amount of material passing along the straw walkers and therefore can be easily remedied by decreasing combine ground speed. However, do not underestimate the effect of other combine adjustments.

Reduce straw walker grain losses as follows:

  • Keep openings in straw walkers clean.
  • Reduce weeds and green material (raise cutting platform).
  • Material overthreshed (reduce cylinder speed).
  • Avoid overload of straw walkers (reduce ground speed).

Reduce sieve losses as follows:

  • Increase air blast from cleaning fan if layers of straw form on sieves.
  • Reduce air blast (fan speed) if grain is blown over the top of cleaning shoe.
  • Open sieves.
  • Keep sieves clean.
  • Add or remove insert fingers to "Slope Master" when working on slopes.
  • Reduce amount of chaff on sieves, avoid overthreshing.
  • Avoid overloading sieves, reduce amount of grain over sieves (reduce ground speed).

AG,CO03622,1586 -19-20AUG04-1/1