Operating the Combine

1. Prepare the combine for the type of crop to be harvested.

NOTE: See information on preparation in this section.

2. Prepare and hook up header to combine.

NOTE: See header preparation and coupling information in the Cutting Platform OM.

AG,CO03622,1601 -19-20AUG04-1/6


3. Start engine, leave it running in slow idle.

ZX002403

AG,CO03622,1601 -19-20AUG04-2/6


4. Move road safety switch to field position.

IMPORTANT: Always engage separating system with engine in slow idle.

5. Switch on separator.

6. Switch on header.

ZX004374

AG,CO03622,1601 -19-20AUG04-3/6


7. Set engine to maximum rpm.

NOTE: Using throttle lever for 1450/1550.

Using throttle rocker switch for CWS/WTS.

ZX002406

AG,CO03622,1601 -19-20AUG04-4/6


8. Engage a transmission speed.

NOTE: Second speed is the best for all-around field performance. Third speed is not recommended for field operation, only for transport.

ZX002054

AG,CO03622,1601 -19-20AUG04-5/6


9. Move multifunction control handle to adapt ground speed to harvesting conditions.

CQ188520

AG,CO03622,1601 -19-20AUG04-6/6