Concave Clearance Adjustment Switch

To adjust concave clearance, starter switch must be in position I or II.

NOTE: The current concave clearance can be displayed on the INFO-TRAK™ monitor. Briefly touch switch (top or bottom part) to display actual setting for 5 seconds.

The number 4 indicates minimum and the number 51 maximum concave clearance.

With manual adjustment, concave clearance is shown on the INFO-TRAK™ monitor.

ZX002325


I-Increase concave clearance
II-Reduce concave clearance

AG,CO03622,1649 -19-09AUG04-1/1