Unloading Auger Drive Switch (With Operating Lock)
NOTE:
With this switch in the on position, the engine starter system is blocked.
Requirements:
·Engine running.
·Road safety switch in field position.
Engaging unloading auger drive:
Push operating lock and depress switch (the end marked with a symbol). The warning light will glow when the drive is engaged.
NOTE:
The system engages the unloading auger drive in any position, including when it is totally swung in.
Disengaging Unloading Auger Drive:
Depress lower part of switch.
NOTE:
For emergency stop, use the "QUICK STOP" switch on the multifunction control handle. In this situation the unloading auger disengages with the unloading auger drive switch in the ON position; to reactivate this function it is necessary turn the unloading auger drive switch OFF and ON again.
NOTE:
Only CWS/WTS combines with operator presence switch:
This switch will disengage this function when activated. To reengage it, sit down again on operator seat and turn the corresponding switch OFF and ON.
|