Adjusting Fan Speed

Fan speed can be increased or decreased by pressing the switch as illustrated. This is only possible with the engine running at maximum rpm, threshing engaged and the road safety switch in field position.

IMPORTANT: After altering fan speed the alarm must also be adjusted. For details see Warning Devices and Monitors .

NOTE: The current fan speed can be displayed on the INFO-TRAK™ monitor.

The fan speed mechanism is protected by limiter switches. The speed can vary between 550 and 1150 rpm.

Changes to fan speed normally occur at a much slower rate than other speed changes because the fan is electrically and not hydraulically driven.

ZX002326


I-Increase fan speed
II-Decrease fan speed

AG,CO03622,1657 -19-20AUG04-1/1