Cleaning Fuel Filter Water Trap-1450/1550

If water and sediment is visible through sight-glass (B), open up drain cock (A) with the engine shut off. Collect the contaminated fuel bleeding out in a suitable container. Then close drain cock (A). To clean the filter follow the procedure outlined below:

Unfasten sight-glass (B).

Remove filter insert (C) and carefully wash it with clean fuel. When the insert has been washed 5 to 10 times, replace the complete water separator for a new one.

Once the filter has been cleaned, re-assemble it, reversing the removal procedure.


A-Drain cock
B-Sight-glass
C-Filter insert

CQ192580

Fuel Filter Water Trap-1450/1550

AG,CO03622,2085 -19-11AUG04-1/1