Engine Coolant
CAUTION:
Danger of scalding! Do not loosen or remove the radiator filler cap when coolant temperature is near or above boiling point. Always loosen cap a little to release pressure before completely removing it.
Add coolant only when the engine is shut off.
When the engine is cool, the coolant level (in the expansion tank) should be up to the "COLD" mark.
Checking Coolant Quality
IMPORTANT:
Regardless of the season, use only John Deere COOL-GARD coolant in the cooling system.
Check condition of coolant mixture before the winter season. Coolant should protect engine against frost down to -36°C (-35°F).
Never use any cooling system additives.
|