|
Drain and flush the cooling system at least once every two years.
Having drained off all coolant, close drain tap or replace plug. Fill system with clean water.
Start engine and run until operating temperature is reached.
Turn cab heater on and leave on until cleaning of cooling system is finished. Stop engine and drain system immediately before rust and sediments settle.
Close drain tap or replace plug. Clean system with commercial cooling system cleaner, following the manufacturer's instructions.
|
Drain off the cleaning product and fill the system with clean water. Shut off engine when water reaches operating temperature and drain system again.
Refill system with the specified coolant.
IMPORTANT:
The cooling system must always be filled with the indicated John Deere coolant. See "Engine Coolant".
|