Final Drives
The combine has two final drive units, one at each end of front axle.
Change oil every 1000 hours of operation.
IMPORTANT:
Every 100 hours, check final drive oil level and play of flanged axle bearings. Clean vent plug daily.
Capacity of Standard Final Drive-1450 and 1450 CWS/WTS (each one):
·3 L (0.79 U.S. gal.)
Capacity of Heavy Duty Final Drive-1550 and 1550 CWS/WTS (each one):
·4.8 L (1.26 U.S. gal.)
IMPORTANT:
Only use specified oil (see "Fuel, Lubricants, Coolant and Capacities" section). Carefully clean area around filler neck before filling with fresh oil.
A-Oil filler neck
B-Vent Plug
C-Oil level check plug
D-Drain plug
|