Hydraulic System Description
The machine is equipped with a so-called "open-center hydraulic system", i.e. with engine running at constant speed the hydraulic pump conveys a constant amount of hydraulic oil.
The hydraulic pump is a triple pump:
·Pump (A) conveys 28.6 L/min. (7.55 gpm)
·Pump (B) conveys 28.6 L/min. (7.55 gpm)
·Pump (C) conveys 10.6 L/min. (2.80 gpm)
If no pressure oil is required, the solenoid pressure valves direct pressure-free oil back to the tank.
The main hydraulic valve block (D) is located on the left-hand side of the combine close to the battery.
The secondary hydraulic valve block (E) is located a few inches away, above the main hydraulic valve block (D).
A-Pump (Hydraulic System)
B-Pump (Reel Drive)
C-Pump (Steering System)
D-Primary hydraulic valve block
E-Secondary hydraulic valve block
|