Functions of the Valves on the Block
The main hydraulic valve block controls 6, 7 or 8 functions of the combine through individual modules (valves) depending on the configuration and combine model:
-
1450/1550 (without header tilt and reel forward position) = 6 functions.
-
CWS/WTS (without header tilt) = 7 functions.
-
1450/1550 (with header tilt) = 8 functions.
-
CWS/WTS (with header tilt) = 8 functions.
The secondary hydraulic valve block controls three functions of the combine.
NOTE:
See detailed list of the valves (solenoids) in the"Service - Electrical System"section.
A-Return to reservoir
B-Hydraulic reverser
C-AHC (Automatic Height Control) / Slow raise/lower of header
D-Fast raise/lower of header (manual)
E-Power and splitter / Out port for secondary valve block
F-Reel raising
G-Reel fore/aft position
H-Threshing cylinder speed variator
I-Header lateral tilt
J-Unloading auger swinging
L-Secondary valve block pressure take-off
N-Header drive
O-Separator engage
P-Unloading auger engage
|