Checking Header Leveling

Periodically check the header to ensure it is level. To check:

- Park the combine on a level, flat surface.

Check if front tire pressure is correct (see "Tire Inflation Pressure" table).

- Completely raise the header.

- Stand in front of the header and check the header-to-chassis alignment or measure the height at both ends (see the illustration).

CQ203820

AG,GG05155,285 -19-20AUG04-1/2


Leveling the Header

NOTE: Adjustment is made on the right-hand side. For illustration purpose, hydraulic reverser has been removed.

- Loosen the 4 bolts (A).

- Turn nuts (B) until the header is level.

- Tighten bolts (A) and nuts (B).

CQ179510

Hydraulic reverser not illustrated.

AG,GG05155,285 -19-20AUG04-2/2