Rasp Bars of Threshing Cylinder

The cylinder has rasp bars with teeth alternately directed to the right and left. If a cylinder bar needs to be replaced the opposite bar will also have to be changed in order to avoid unbalancing the cylinder.

To remove the bars, grind off and re-weld in the same manner.

NOTE: On high inertia cylinders bars are not welded.

Tighten the bar bolts to 78 N·m (57 lb-ft).

IMPORTANT: After changing bars retighten the mounting bolts after the first five hours of operation and before harvesting.

CQ179740

Threshing cylinder with bars

CQ209020

High inertia threshing cylinder

AG,GG05155,309 -19-20AUG04-1/1