Area Counter - Setting up (CWS and WTS)

Two sets of information must be determined by the operator in order to make the system work. It is important that the following is accurately measured:

1. Circumference of the wheel to which the magnet is mounted.
2. Working width of the platform used.

These two figures are determined as follows:

MB03730,0000210 -19-09SEP03-1/2


Wheel circumference is determined as follows:

1. Make a mark in the field and on the tire.
2. Drive until the rear wheel has made 10 revolutions.
3. Make another mark in the field.
4. Measure the distance between the two marks in meters and centimeters. Divide this distance by 10 to obtain the effective wheel circumference.

NOTE: Remember to count the revolutions of the rear right side wheel, on which the magnet is mounted.


H-Wheel circumference

CQ209472

MB03730,0000210 -19-09SEP03-2/2