Adjusting Straw Chopper Counterknives
The length of chopped material can be modified by altering angle of the counterknives.
IMPORTANT:
Counterknives should only be moved inwards as far as absolutely necessary to prevent waste of engine power.
| Positions of counterknives |
Utilization in accordance with the type of straw |
| Shallow angle |
Dry straw |
| Slightly angled |
Wet straw and weeds |
| Fully angled |
Rape and crop straw in general |
To adjust the counterknives (A), loosen screws (B) on both sides.
CWS/WTS Combines:
Adjust the angle of the counterknives by pulling on cross-member (C).
|