Spread Angle Adjustment of Chaff Spreader
Lateral plate (B or D) determines the spread angle for the chaff. This angle may be adjusted.
I - Increased spread angle:
Used for large chaff (e.g. corn straw), or chaff with excessive moisture, or when a combine is using a larger header.
II - Reduced spread angle:
Used for small chaff (e.g. wheat), or chaff with low moisture content, or when a combine is using a smaller header.
Adjustment procedure:
1.
Shut off the machine.
2.
On a flat place, use a correct tool to loosen bolt (A or C).
3.
Adjust spread angle of lateral plate (B or D).
|