Engine Coolant

causym CAUTION: Danger of scalding! Do not loosen or remove the radiator filler cap when coolant temperature is near or above boiling point. Always loosen cap a little to release pressure before completely removing it.

Add coolant via uncapped opening, only when the engine is shut off.

When the engine is cool, the coolant level (in the expansion tank) should be up to the "COLD" mark.

Checking coolant quality

IMPORTANT: Regardless of the season, use only John Deere COOL-GARD in the cooling system.

Never use any cooling system additives.

T6642EK

ML70882,00004A5 -19-19JUL04-1/1