Chaff Spreader Drive
CAUTION:
NEVER operate the combine without shields correctly installed.
1450/1550 Combines:
The chaff spreader is driven by the left-hand side of the rear crankshaft of the straw walker. The drive belt is tensioned by two idler pulleys (B) which are under spring (C) tension.
·There is no adjustment.
·With insufficient belt tension, replace spring.
NOTE:
To access drive belt remove shield (A).
CWS/WTS Combines:
The chaff spreader is driven via a hydraulic hose on the left-hand side of the combine.
NOTE:
The chaff spreader is driven by the hydraulic pump located in the straw walker intermediate drive set.
|