|
2.
Considering the turning direction (according to the arrow), which is opposite to the tensioner system (within the rectangle), approximate the steel track to the front axle hub propping the drive wheel (4).
3.
Position support axle (5) correctly on combine front axle by fixing it with twelve bolts (6) to the following torque:
Specification
|
Steel track support axle
-Torque
|
240 N.m (24 kgf.m, 175 lb.ft)
|
4.
Then fix steel track drive wheel to bolts to the following torque:
Specification
|
Drive wheel bolts
-Torque
|
420 N.m (42 kgf.m, 305 lb.ft)
|
5.
Remove supports (1 and 3) from steel track lift points and support (7).
6.
Repeat the combine wheel removal and fastening procedure on the other side of the machine.
Lower combine front axle to the ground.
|
Turning direction of steel track
|