Rear Axle Toe-In
Whenever the combine becomes difficult to steer or the rear tires begin to wear unevenly, check rear wheel toe-in.
Proceed as follows to check and adjust alignment:
·On a flat surface, straighten the rear wheels.
·Mark a point on the upper center part of each tire (the highest point on a central axis). Measure distance (A).
·Drive the Combine half turn back (180°), that is, the marks on the tires are now at the lowest part of the wheel.
·Measure distance (B). It should be 10 mm (0.4 in.) greater than distance (A).
·To adjust, loosen the locknuts at both ends of the tie rod and adjust the tie rod length.
|