Engaging a Speed-CWS/WTS
Select 3rd speed for road travel. In this transmission speed maximum engine speed is reduced to 2250 rpm.
NOTE:
Reducing engine speed is effected by reading switch (A) on the transmission. The switch is connected to the engine ECU.
The selected speed can only be shifted with the hydro lever in neutral position or when traveling with a ground speed below 1.5 Km/h. During movement of the combine, the gearshift cam is automatically locked in place by a solenoid.
NOTE:
Check proper solenoid function daily by listening to the solenoid action with the engine shut off, turning the starter key switch ON and OFF - to stages I and II. If a defect occurs, consult your John Deere dealer.
For field operation:
·Select a speed suitable to working conditions (preferably 2nd speed).
|