Mounting Seed Disk

1. Open vacuum meter.

2. 
   A50297-UN-11OCT02

   
   A46247-UN-13JUN00

   A - Seed Disk

   B - Hub Rod

   C - Section

   Install seed disk (A) into housing. Hold disk securely and rotate hub rod (B).

---




3. NOTE: The seed disk (A) should rotate smoothly, slightly touching the meter case. Seed should not leak around circumference of meter. When planting small seeds such as sorghum the seed disk should remain in light contact with the housing to prevent the escape of seeds.

   Manually turn the disk and check the space between the disk and the meter housing in the indicated section (C). If the disk encounters a lot of friction or if seeds are escaping through this space, the adjust the position of the hub. See “Meter Hub Adjustment” in this section.