Maintenance Safety

Familiarize yourself with the maintenance procedures before servicing. Keep area clean and dry.

Do not perform lubrication or adjustment services while the machine is moving.

Keep hands, feet and clothing away from moving parts.

Position all the Controls in neutral and disconnect all electrical functions. Lower the header to the ground. Stop the engine. Remove the key switch. Wait for the machine to cool down.

Firmly prop up any element that requires to be in a raised position for servicing.

Keep all parts in good condition and properly installed.

Repair damaged parts immediately. Replace worn or damaged parts.

Remove all excessive dirt and oil.

Disconnect the mass (-) cable from the Battery before servicing the Electrical System or before performing any welding services on the Combine.

CQ,SGCAMANU -19-13MAR02-1/1