IMPORTANT: Recommended service intervals are for average conditions. Service more frequently if combine is used in extreme conditions.

2. Change air compressor oil.

3. Lubrication points. One point on the unloading auger drive gear.

4. Check level of brake fluid. Pull cap for access. Fill up if necessary. See "Oil Reservoir of Brake System and Clutch" for more details.

5. Retighten front wheel nuts.

NOTE: See "Tightening of Wheel Nuts" for more details.

6. Check oil level in transmission box. Fill up if necessary. See "Change Oil of Transmission Housing".

7. Lubrication points. One point on cleaning system fan drive pulley.

8. Check oil level of final drives. Fill up if necessary.

9. Check clamps and hoses of turbocharger feeder system. Retighten if necessary.

CAUTION: Avoid burns by contact with hot parts. Only carry out check with engine at ambient temperature.

10. Lubrication points. One point on cleaning system fan bearing (on both sides of combine).

11. Check parking brake cable and readjust, if necessary.

12. Lubrication points. One point on external side of unloading auger.

ML70882,00008BD -19-26SEP05-1/1